Cart Contents

Cart


Opal Jewelry Information » Opal Articles »

A Guide To Buying Opals

A Guide to Buying Opals and Opal Jewelry Online.

 

Buying opals and opal jewellery in a shop is difficult enough but to buy them online is a daunting task. But I can help with some advice which will smooth the way.

 

First of all we want to know whether we want to buy real or synthetic opals.  Notice I didn’t say fake opals.  Naturally we all would prefer real opals to artificial opals but if the budget does not reach that far then we would prefer to have synthetic than nothing.

 

Synthetic opals are man made in a laboratory and will be called “created opals” by most websites. They can make stunning jewelry too.  The may also be called “imitation opals.”

 

Let’s say after deciding that we want real or natural opals we now need to decide whether we want a solid opal, a doublet which is sometimes spelled “dublet” or a triplet. 

 

You may be aware that a solid opal is one piece and is the best and most expensive.

 

A solid opal which is very thin, too thin to make into a piece of jewelry, will have another piece of  black colored opal glue to the back of it to give it strength and to bounce the stone’s bright colors.  Doublets are cheaper than solids and can often look even nicer.  We just have to be aware that they are not solid opals. 

 

A triplet is basically a doublet with a dome of clear material such as quartz or glass on the top of it.  These are the cheapest of all but often look fantastic.  Again we just need to have an understanding of what we are buying.

 

Let’s say we want a natural, solid opal.  The next thing is to think of color.  Anything with red in it is going to be the most expensive. Then green is the next expensive and then blue.  But having said that, I have seen plenty of bright blue solid opals which are far nicer and much more expensive than dull pieces of red.  So it is a matter of how bright and fiery the actual stone is rather than whether it is red, blue, green or any other color.

 

As you may know opals from Australia are often called black opal, crystal opal and boulder opal.   I have dealt with these in other articles which you will find on my website but here let’s stick to what you need to know regarding opals in general.

 

As most good opals come from Australia you are going to see their measurements in millimeters rather than inches or parts of inches.  Most opals will be either an oval shape or called a “free form.”  That means that it is an irregular shape.  The market over many years has dictated that oval shapes are the most popular.

 

This is an important distinction since ovals are more likely to go into a setting that your jeweler already has rather than having to make a setting specially for that free form stone which is going to cost you a good deal more.

 

Some opals will be round but this is not popular and is the most difficult shape to cut.

Read the description of the opal or opal jewelry very carefully. What you want to know is the size firstly.  If it is for a ring then you’ll be looking for an oval 7 x 5mm, or 8 x 6mm, or 10 x 8mm, or even 9 x 7mm.  These are the sizes that your jeweler might have a ring mounting ready made to suit your stone.  Otherwise he will have to custom make one.

 

A pendant size can be anything from 8 x 6mm and bigger.  Smaller than this is getting a bit too small for a pendant.

 

The next thing you want to know is the thickness of the stone. Generally any opal under 1.5mm is going to be too thin.  An opal thicker than 4mm may be difficult to set in a ring.

 

Of course, I am generalizing here.  I have set solid opals measuring 18 x 13 x 6mm in rings but they were large.

 

Next you want to be aware if there are any inclusions or faults in the top surface of the stone.  Stones such as emeralds, sapphires and diamonds have what we call inclusions.  If you look closely at the stone you will see some cracks, tiny holes discolorations and other things.  These devalue the stone but most times do not make it unworthy of sale.

 

Opals are different.  We don’t want any cracks or holes in our opals.  It is okay to have a pitted surface on the bottom of the opal or a bit of what we call sand.  This is sometimes mixed in with the opal structure and the cutter will make sure that is the bottom or underneath of the opal.

 

A word about opal cutting.  Most opals are cut by miners or their wives.  There are very few professional opal cutters. They usually have no formal training in a college or school of some sort.  Consequently the cutting is poor. 

 

The problems here are that the stones will not be a perfect shape and might need cutting again to allow them to be made into a lovely piece of jewelry.  People who can cut opals well are hard to find in Australia so in another country they are going to be even rarer.  Your jeweler will almost certainly not know how to or want to cut opals.  So, you should look at the shape of the opal carefully and ask the seller if this will be ready to set into a ring without needing any further cutting.

 

Weight of the Opal.  This is also important.  We in the Lightning Ridge area of opal mining in the state of NSW in Australia weigh our opals in carats.  A good sized opal for a ring will be between one and three carats.  Naturally, there are tiny sized stones which are lovely.  I have set 0.3 of a carat many times but if you are unfamiliar with buying opals you will be disappointed with your purchase which will always look big on a website if you have bought a 5 x3mm stone weighing 0.2 carats.

 

Let me answer all your questions about opals and opal jewelry.

 

Gary Hocking

 


Browse Our Categories


View Cart